SMART Board GX - Configuring source selection and priority

Appendix B Adjusting source, image mode, audio mode, and menu settings
smarttech.com/kb/171744 85
Source settings
Option Values Function Notes
All Source
Select an input source VGA
AV
YPBPR
OPS
DP
HDMI
HDMI1
HDMI2
USB-C
Select a connected computer or
other device’s input source to view
on the display.
Three dots ••• appear below inputs
(USB Type-C, HDMI, HDMI 1, HDMI 2,
OPS and DP) with a connected
device.
If the display’s input source is set to
HDMI2 and a computer is connected
to the HDMI2 input, the display
wakes automatically whenever the
computer wakes.
Note
Input sources that are locked and
prevented from being selected
will be disabled.
Source setting
Automatic source switch Enable
Disable
Enables or disables automatic
connection to an active source or
switching automatically when a new
source is connected.
[N/A]
Source Priority 1, 2, 3, 4, 5, or 6 Sets the priority of input sources. A
new input source will only become
the primary source if it has a priority
higher or equal to the current input
source.
This option is only available when
Automatic Source Switch is enabled.
Source Lock Locked
Unlocked
Prevent selection of an input source. When Android is locked out, the
following functionality is greyed out
and disabled:
Floating Menu
l
All options except back,
settings, and input selection
are disabled.
Remote Control
l
Home button is disabled.
Front Control Panel
l
Home button is disabled..
See Appendix B Adjusting source,
image mode, audio mode, and
menu settings on the previous page