SMART Board GX User Manual

smarttech.com/kb/171744 54
Chapter 4 Maintaining the display
Turning the display on or off 54
Cleaning and maintaining the display 56
Checking the display installation 56
Cleaning the screen 56
Cleaning the touch sensors 56
Maintaining ventilation 57
Preventing condensation 57
Replacing the pens 58
Removing and transporting the display 58
Updating system firmware 59
Applying a firmware update 59
Updating system firmware manually 60
With proper maintenance, the display will provide years of use.
Turning the display on or off
In most situations, you can put the display in Standby mode when not using it by following the
instructions in SMART Board GX series interactive displays user guide (smarttech.com/kb/171745).
In some situations, such as when you move the display or clean its screen, you need to turn the display
off. You can turn it back on after.
To turn the display off
1.
Press the Power button on the front control panel or the remote control for five seconds and wait
for the status light to stop blinking.

SMART Board GX Specifications

General

Aspect Ratio	16:9
Touch Points	20
Response Time	8 ms
Brightness	350 cd/m²
Display Size	75 inches
Resolution	4K UHD (3840 x 2160)
Connectivity	HDMI, USB, VGA
Display Type	LED
Viewing Angle	178°
Included Software	SMART Notebook