SMART Board GX - Appendix E Disabling the Embedded os and Other Inputs; Opening the Displays Source, Image Mode, Audio Mode, and Menu Settings; Disabling the Embedded os

smarttech.com/kb/171744 97
Appendix E Disabling the embedded
OS and other inputs
Admins can disable specific inputs, including the embedded Android OS. This is ideal for environments
that use only connected devices.
Opening the display’s source, image mode, audio
mode, and menu settings
1.
Open the Side Toolbar menu by sliding either of the Side Toolbar menu handles (located either
side of the screen) toward the center of the screen.
2.
Tap the Input Select icon .
The Source Settings dialog appears.
Note
If the Setting Lock option is enabled, only admins can access the source settings. See Lock control on
page81
Disabling the embedded OS
1.
In Source Settings > Source Lock, select Android to disable the embedded OS.
2. Under Boot Source, select a new video input source to open when the display starts.
3. Restart the display.
The new video input source will open when the display restarts. When Android is disabled, the following
features are no longer available:
l
Floating Menu: All options except back, settings, and input selection are disabled.
l
Remote Control: Home button is disabled.
l
Front Control Panel: Home button is disabled.