SMART Board GX User Manual

Chapter 2 Installing the display
smarttech.com/kb/171744 24
To configure the network
1. Open the required TCP/UDP ports:
Protocol Port range Feature
TCP 80 System software update
TCP 56789 EShare app
TCP 25123 EShare app
TCP 8121 EShare app
TCP 8000 EShare app
TCP 8001 EShare app
TCP 48689 EShare app
TCP 25123 EShare app
2. Add the following URLs to the to the network allowlist:
URL Feature
h1.ee-share.com EShare app
worldota.syrjb.com:9900 System software update
sw.syrjb.com:8081 Whiteboard sharing
3. Configure the network to enable broadcast service.
4. Configure the network to allow mDNS (multicast).
Connecting to a network
The display requires a network and internet
connection for downloading software and firmware
updates. You can connect to a network using Wi-Fi
or one of the RJ45 Ethernet jacks.

SMART Board GX Specifications

General

Aspect Ratio	16:9
Touch Points	20
Response Time	8 ms
Brightness	350 cd/m²
Display Size	75 inches
Resolution	4K UHD (3840 x 2160)
Connectivity	HDMI, USB, VGA
Display Type	LED
Viewing Angle	178°
Included Software	SMART Notebook