SMC Networks HRS012-A*-10-* - Page 110

HRX-OM-M090
Chapter 5 Display and setting of various functions
5.18 Communication function HRS Series
5-58
14. Select slave addresses (simple communication protocol) from the table below with [▲]
key or [▼] key, and confirm by pressing “SEL”.
Table 5.18-8 List of set value
Set value Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
serial protocol setting is simple
communication protocol.
to
Sets of slave addresses for simple
communication protocol.
Set range is 1 to 99.
Communication speed (simple communication protocol) Setting/checking
15. Press the [SEL] key once.
The set screen of communication speed (simple communication protocol) is displayed
on the digital display.
PV
SV
16. Select communication speed (simple communication protocol) from the table below with
[▲] key or [▼] key, and confirm by pressing “SEL”.
Table 5.18-9 List of set value
Set value Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
serial protocol setting is simple
communication protocol.
1200bps
2400bps
4800bps
9600bps
○
19200bps
BCC (simple communication protocol) Setting/checking
17. Press the [SEL] key once.
The set screen of BCC (simple communication protocol) is displayed on the digital
display.
PV
SV