EasyManuals Logo

SMC Networks SMC8126L2 User Manual

SMC Networks SMC8126L2
502 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #200 background imageLoading...
Page #200 background image
Configuring the Switch
3-156
3
based on an access list, a DSCP or IP Precedence value, or a VLAN, and click
the Add button next to the field for the selected traffic criteria. You can specify up
to 16 items to match when assigning ingress traffic to a class map.
The class map is used with a policy map (page 3-158) to create a service policy
(page 3-161) for a specific interface that defines packet classification, service
tagging, and bandwidth policing. Note that one or more class maps can be
assigned to a policy map.
Command Attributes
Class Map
Modify Name and Description – Configures the name and a brief description of
a class map. (Range: 1-16 characters for the name; 1-64 characters for the
description)
Edit Rules – Opens the “Match Class Settings” page for the selected class entry.
Modify the criteria used to classify ingress traffic on this page.
Add Class – Opens the “Class Configuration” page. Enter a class name and
description on this page, and click Add to open the “Match Class Settings” page.
Enter the criteria used to classify ingress traffic on this page.
Remove Class – Removes the selected class.
Class Configuration
Class Name – Name of the class map. (Range: 1-16 characters)
Type – Only one match command is permitted per class map, so the match-any
field refers to the criteria specified by the lone match command.
Description – A brief description of a class map. (Range: 1-64 characters)
Add – Adds the specified class.
Back – Returns to previous page with making any changes.
Match Class Settings
Class Name – List of class maps.
ACL List – Name of an access control list. Any type of ACL can be specified,
including standard or extended IP ACLs and MAC ACLs. (Range: 1-16 characters)
IP DSCP – A DSCP value. (Range: 0-63)
IP Precedence – An IP Precedence value. (Range: 0-7)
VLAN – A VLAN. (Range:1-4094)
Add – Adds specified criteria to the class. Up to 16 items are permitted per class.
Remove – Deletes the selected criteria from the class.

Table of Contents

Other manuals for SMC Networks SMC8126L2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SMC Networks SMC8126L2 and is the answer not in the manual?

SMC Networks SMC8126L2 Specifications

General IconGeneral
BrandSMC Networks
ModelSMC8126L2
CategorySwitch
LanguageEnglish

Related product manuals