Switch Cluster Commands
4-241
4
Commander is not supported.
• There is no need to enter the username and password for access to the
Member switch CLI
.
Example
show cluster
This command shows the switch clustering configuration.
Command Mode
Privileged Exec
Example
show cluster members
This command shows the current switch cluster members.
Command Mode
Privileged Exec
Example
Vty-0#rcommand id 1
CLI session with the TigerSwitch 10/100/1000 is opened.
To end the CLI session, enter [Exit].
Vty-0#
Console#show cluster
Role: commander
Interval heartbeat: 30
Heartbeat loss count: 3
Number of Members: 1
Number of Candidates: 2
Console#
Console#show cluster members
Cluster Members:
ID: 1
Role: Active member
IP Address: 10.254.254.2
MAC Address: 00-12-cf-23-49-c0
Description: TigerSwitch 10/100/1000 SPORT MANAGE
Console#
To Next Page
Loading...
Need help?
General
