VLAN Commands
4-175
4
Displaying VLAN Information
show vlan
This command shows VLAN information.
Syntax
show vlan [id vlan-id | name vlan-name | private-vlan private-vlan-type]
• id - Keyword to be followed by the VLAN ID.
- vlan-id - ID of the configured VLAN. (Range: 1-4094, no leading zeroes)
• name - Keyword to be followed by the VLAN name.
- vlan-name - ASCII string from 1 to 32 characters.
• private-vlan - For an explanation of this command see “show vlan
private-vlan” on page 4-184
- private-vlan-type - Indicates the private vlan type.
(Options: Community, Isolated, Primary)
Default Setting
Shows all VLANs.
Command Mode
Normal Exec, Privileged Exec
Example
The following example shows how to display information for VLAN 1:
Table 4-57 Show VLAN Commands
Command Function Mode Page
show vlan Shows VLAN information NE, PE 4-175
show interfaces status vlan Displays status for the specified VLAN interface NE, PE 4-123
show interfaces switchport Displays the administrative and operational status of an
interface
NE, PE 4-125
Console#show vlan id 1
Vlan ID: 1
Type: Static
Name: DefaultVlan
Status: Active
Ports/Port channel: Eth1/ 1(S) Eth1/ 2(S) Eth1/ 3(S) Eth1/ 4(S) Eth1/ 5(S)
Eth1/ 6(S) Eth1/ 7(S) Eth1/ 8(S) Eth1/ 9(S) Eth1/10(S)
Eth1/11(S) Eth1/12(S) Eth1/13(S) Eth1/14(S) Eth1/15(S)
Eth1/16(S) Eth1/17(S) Eth1/18(S) Eth1/19(S) Eth1/20(S)
Eth1/21(S) Eth1/22(S) Eth1/23(S) Eth1/24(S) Eth1/25(S)
Eth1/26(S)
Console#
To Next Page
Loading...
Need help?
General
