EasyManuals Logo

SMC Networks SMC8126L2 User Manual

SMC Networks SMC8126L2
502 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #368 background imageLoading...
Page #368 background image
Command Line Interface
4-126
4
Example
This example shows the configuration setting for port 24.
Console#show interfaces switchport ethernet 1/24
Broadcast threshold: Enabled, 500 packets/second
LACP status: Enabled
Ingress Rate Limit: Disabled, 100000 Kbits per second
Egress Rate Limit: Disabled, 100000 Kbits per second
VLAN membership mode: Hybrid
Ingress rule: Enabled
Acceptable frame type: All frames
Native VLAN: 1
Priority for untagged traffic: 0
Gvrp status: Disabled
Allowed Vlan: 1(u),
Forbidden Vlan:
Private-VLAN mode: NONE
Private-VLAN host-association: NONE
Private-VLAN mapping: NONE
Console#
Table 4-43 Interfaces Switchport Statistics
Field Description
Broadcast threshold Shows if broadcast storm suppression is enabled or disabled; if enabled it also
shows the threshold level (page 4-122).
Lacp status Shows if Link Aggregation Control Protocol has been enabled or disabled
(page 4-132).
Ingress rate limit Shows if ingress rate limiting is enabled, and the current rate limit. (page 4-129).
Egress rate limit Shows if egress rate limiting is enabled, and the current rate limit. (page 4-129).
VLAN membership mode Indicates membership mode as Trunk or Hybrid (page 4-170).
Ingress rule Shows if ingress filtering is enabled or disabled (page 4-171).
Note: Ingress filtering is always enabled.
Acceptable frame type Shows if acceptable VLAN frames include all types or tagged frames only
(page 4-171).
Native VLAN Indicates the default Port VLAN ID (page 4-172).
Priority for untagged traffic Indicates the default priority for untagged frames (page 4-184).
Gvrp status Shows if GARP VLAN Registration Protocol is enabled or disabled (page 4-165).
Allowed Vlan Shows the VLANs this interface has joined, where “(u)” indicates untagged and
“(t)” indicates tagged (page 4-173).
Forbidden Vlan Shows the VLANs this interface can not dynamically join via GVRP (page 4-174).
Private VLAN mode Shows the private VLAN mode as host, promiscuous, or none (4-182).
Private VLAN
host-association
Shows the secondary (or community) VLAN with which this port is associated
(4-183).
Private VLAN mapping Shows the primary VLAN mapping for a promiscuous port (4-184).

Table of Contents

Other manuals for SMC Networks SMC8126L2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SMC Networks SMC8126L2 and is the answer not in the manual?

SMC Networks SMC8126L2 Specifications

General IconGeneral
BrandSMC Networks
ModelSMC8126L2
CategorySwitch
LanguageEnglish

Related product manuals