61
Guided Component Tests Training and Classes
Figure 7-1 Sample confirmation dialog box
6. Select OK from the confirmation screen.
7. Select ENGINE from the System Select screen and a list of tests available for the identified
vehicle displays.
8. Select a test from the list to continue.
The identification sequence is now complete, refer to the Operations section that follows for
details on how to navigate through the Guided Component Tests information and perform tests.
7.2 Training and Classes
Training and Classes is a companion feature to the Guided Component Tests function. This
resource includes a wide collection of common (non-vehicle specific) reference information and
tests, such as measuring fuel pump current ramp, and monitoring CKP and CMP signals
simultaneously. Also included are, basic component operation and theory information, testing
procedures, tips, definitions, illustrations, diagnostic tool feature descriptions and accessory
information.
z To access Training and Classes:
1. Select Guided Component Tests from the Home screen.
2. Select Training and Classes from the Vehicle Make menu to access the menu options.
Each menu option is described in the following sections:
• Power User Tests
• How To Guide
• Features and Benefits
• Index
To Next Page
Loading...
