Snap-On Modis Ultra - Temperature Probe Adapter (Optional); Pressure Transducers and Adapters (Optional)

74
Scope Multimeter Test Leads and Accessories
8.3.6 Temperature Probe Adapter (optional)
The temperature probe adapter can be used to measure temperatures ranging from –50° F to
1,800° F. Different probes are available for surface, fluid and air temperature measurements.
Figure 8-6
8.3.7 Pressure Transducers and Adapters (optional)
Different pressure transducers and adapters are available for measuring positive and negative
gas and liquid pressures. Depending on the adapter, measurement capabilities range from 1 to
5000 psi and up to 29 inHg. Measurement and application capabilities vary per device.
Figure 8-7