Snap-On Solus - Adjusting Brightness and Contrast

18
Getting Started Adjusting Brightness and Contrast
3.10 Adjusting Brightness and Contrast
The Brightness/Contrast button(Figure 3-5) lets you to adjust the screen for optimum viewing.
Figure 3-5
Set Brightness/Contrast dialog box
1— Brightness slider control
2— Contrast slider control
z To adjust screen brightness and contrast:
1. Press the Brightness/Contrast button.
The Set Brightness/Contrast dialog box displays (Figure 3-5).
2. Select a slider control using the right c or left e arrow.
3. Press the up b or down d arrow to increase or decrease Brightness and Contrast.
4. Press N/X to close the Set Brightness/Contrast dialog box when you are finished.
1
2