socomec NET-VISION User Manual

38
GB
NET-VISION 7 - SOCOMEC
19. NET VISION MANAGEMENT
19.1. DATE and TIME
UPS Date and Time
Net Vision allows the synchronisation of the UPS date and time. When Net Vision detects a new
date and time (set manually or via NTP server), it sends the new values to the UPS if this func-
tion is enabled.
This function is enabled if the date and time are managed by the UPS. Otherwise this part is not displayed.
sends the current date and time to the UPS manually.
Date and Time
Synchronise with computer where the web browser is open
Synchronise with NTP server
Set values manually.
Net Vision also manages the time zone; GMT + [x] hours.
Date and Time
Date on UPS (dd/mm/yyyy)
Time on UPS (hh:mm:ss)
Synchronize UPS
Disabled 
Enabled
Date and Time
System Date(dd/mm/yyyy)
System Time(hh:mm:ss)
Time Zone
GMT+
Daylight Saving Time:
Disabled Enabled
Synchronize with computer time
Computer Date:
Computer Time:
Synchronize with NTP server
NTP Server:
IP address
Set manually
Date (dd/mm/yyyy):
01/01/2017
Time(hh:mm:ss):
00:00:00
In case of using NTP synchronisation GMT and daylight management are to set according
NTP server conguration.
GMT time zone and daylight are often managed by NTP server itself.

socomec NET-VISION Specifications

General

Brand	socomec
Model	NET-VISION
Category	Network Card
Language	English