socomec NET-VISION User Manual

41
GB
NET-VISION 7 - SOCOMEC
19.4. MULTI-USER TABLE
This table sets user’s credential to access the NET VISION interface, NET VISION allows up to 8
user accounts.
Admin account is not managed in this table, this account is always active.
To be more effective the “HTTP Security Control” must be set to force the login before accessing to
web pages.
Multi-User Table
Index User Name Password Access type
1
Disabled 
Read Only
Read/Write
Remark:
This table combines with the RADIUS function. NET VISION checks before on RADIUS server (if
enabled) the user account. If the user is existing on RADIUS server, NETVISION will take the RA-
DIUS account credentials. Otherwise he will check the local user account set in the
Multi-User table.
19.5. REMOTE VIEW PRO CONFIGURATION
If Remote View Pro supervision SW is running to monitor the UPS, the server IP must be report-
ed in NET VISION.
Remote View Pro SW sees NET VISION as a communication node server.
NET VISION must be added on Remote View Pro accordingly.
Remote View Pro Conguration
Server Control
Disabled 
Enabled
Server IP
Server Port 80
GUID NV MAC address
Password To set

socomec NET-VISION Specifications

General

Brand	socomec
Model	NET-VISION
Category	Network Card
Language	English