socomec NET-VISION User Manual

46
GB
NET-VISION 7 - SOCOMEC
19.10. AUTHENTICATION CONFIGURATION
This page gives the description of Authentication Conguration settings.
“UDP Port”
This parameter displays the RADIUS protocol port.
“Primary Server”
Primary RADIUS server IP or domain name.
“Secondary Server”
Backup RADIUS server IP or domain name. If the RADIUS server is not
backed-up the parameter can remain blank.
“Share Secret of Primary Server”
This parameter is used to transmit an encryption password between NET
VISION and primary RADIUS server. This value must be the same as the
primary RADIUS server setting.
“Share Secret of Secondary Server”
This parameter is used to transmit an encryption password between NET
VISION and the secondary RADIUS server. This value must be the same as
the secondary RADIUS server setting. If the RADIUS server is not backed-
up the parameter can remain blank.
“Packet Timeout Interval”
When the RADIUS server does not respond within time interval, the authen-
tication packet will be re-sent.
“Packet Retry Times”
When the RADIUS server does not respond the authentication request will
be re-sent according to packet retry times.
If you do not have a secondary radius server, you can only set “Primary Server” and “Share Se-
cret of Primary Server”.
Authentication Conguration
UDP Port 1812
Primary Server
Secondary Server
Share Secret of primary Server
Share Secret of secondary Server
Packet Timeout
1
Packet Retry
3
Note:
This service allows all users set in the RADIUS server to login to NET VISION with Read/Write
permission.
MULTI-USER TABLE
To be used for changing the RADIUS user’s rights for NET VISION.

socomec NET-VISION Specifications

General

Brand	socomec
Model	NET-VISION
Category	Network Card
Language	English