socomec NET-VISION User Manual

55
GB
NET-VISION 7 - SOCOMEC
21.3. UPS EVENTS LOG
All incoming and out coming alarms detected by NET VISION are stored in the UPS events log.
UPS Events Log
from dd/mm/yyyy to dd/mm/yyyy
Log count per page 5
<< < 1 2 3 > >>
Event Time (dd/mm/yyyy hh:mm:ss)  Event Level 
Event Description
01/01/1970 00:00:00
Information
Warning
Critical
‘has been removed’
when the alarm disappears
Clicking on  changes the display order: by date and time or by severity level.
List of UPS event stored by NET VISION
UPS Imminent Stop
UPS Power Off If function present
Overload Alarm Wrong Conguration
Ambient Temperature Alarm Internal / Communication failure
Transfer locked Option Board Alarm
Transfer impossible External Input 1 to 4 Alarm If ADC programmed
Insufcient resource Parallel system only Unit 1 to 12 General Alarm Parallel system only
Redundancy lost Parallel system only UPS connected
Output Short circuit detection UPS not connected
Maintenance Alarm Power Plugs 1 to 4 ON If power share plugs present
Remote Service Alarm If function present Power Plugs 1 to 4 OFF If power share plugs present
General Alarm Transfer Load to Bypass
UPS STATUS EVENTS
Battery disconnected If function present Transfer Load to Inverter
Battery discharged Enable eco mode
End of Backup Time / Battery Low Disable eco mode
Operating on Battery Enable standby mode
Battery Temperature Alarm If function present Disable standby mode
Battery Room Alarm If function present Alarm Acknowledgement
Battery Test failed On maintenance bypass
Battery Alarm Auto-test in progress
Rectier Critical Alarm Rectier General Al. Battery test in progress
Rectier Preventive Alarm Load protected by Inverter
Rectier Input Supply not OK Normal mode
Gen Set Alarm If function present UPS in eco mode
Charger Critical Alarm Load on bypass
Charger Preventive Alarm Charger General Al. Unit Available
Inverter Critical Alarm On standby
Inverter Preventive Alarm Inverter General Al. Load off
Bypass Critical Alarm UPS shut off sent
Bypass Preventive Alarm Bypass General Al. Standby schedule sent
Bypass Input Supply not OK Eco mode schedule sent
Phase Rotation fault
Maintenance Bypass Alarm
FAN Failure

socomec NET-VISION Specifications

General

Brand	socomec
Model	NET-VISION
Category	Network Card
Language	English