socomec NET-VISION - Modbus TCP Configuration

47
GB
NET-VISION 7 - SOCOMEC
19.11. WOL TARGETS
The “Wake On LAN” function restarts through network interface all registered client servers. Up
to 32 MAC client addresses can be managed by NET VISION. WOL frame is sent to servers in
case of servers have been shut down after an AC failed procedure.
Wake On LAN Targets
Repeating Times 1
Interval Timer (s)
1
Test Index Mac Address Control Description
1
00:00:00:00:00:00
Enabled 
19.12. MODBUS TCP CONFIGURATION
This page enables or disables the MODBUS TCP protocol; the MODBUS Port can be changed.
Modbus Conguration
Modbus TCP Conguration
Enabled 
Disabled
Modbus Port
502
Refer to Annex for UPS data access through MODBUS TCP protocol.