7
GB
NET-VISION 7 - SOCOMEC
3.3. NET VISION 7 FEATURES
3.3.1. UPS FUNCTIONS
• Real-time UPS health monitoring
• Comprehensive UPS management and exible conguration via Web Browser
• Automatic detection of UPS architecture: single, modular, or parallel system.
• Battery test management (if supported by UPS)
• UPS controls (If enabled by UPS)
• UPS date and time synchronisation (if enabled by UPS)
• Automatic UPS events notication via E-mail and SNMP Trap
• Complete shutdown procedure to protect up to 250 servers/workstations or HOSTS/VM from
data loss due to power outage
• Scheduling shutdown/start-up/reboot of UPS via remote control (only for single phase UPS)
• Regularly records UPS parameters for statistical analysis and event diagnostics
3.3.2. NETWORK SERVICES
• Assigned IP automatically via DHCP or BOOTP
• Standard RFC1628 UPS MIB and NET VISION proprietary MIB supported
• 10/100Mbps fast Ethernet auto-sense network environment
• Conguration utility simplies the rmware upgrade process
• Radius users account support
• IPv4 and IPv6 dual-stake
• Supports MODBUS TCP protocol to connect monitoring equipment
• Digital output to support relay control device (EMD)
• Firewall network access control avoiding non-authorized IP access
3.3.3. NETWORK PROTOCOLS
• IPv4 / v6
• HTTP / HTTPs with certicate
• DHCP / BOOTP
• SNMP v1 / v2c / v3 (MD5-SHA / DES-AES)
• SMTP over TLS
• SSH
• UPnP
• NTP / ICMP
• WOL
• RADIUS
• TFTP
• SYSLOG
To Next Page
Loading...
Need help?
General