Solar-Log 1000 User Manual

11
Operating via a web browser within your own network
Clicking on the green exclamation mark in the header displays the following window:
Fig.: Window displayed indicating that a new rmware version is available
Selecting "OK" redirects you to the page of the Solar-Log™ for firmware updates. Selecting "Cancel" closes
the window.
Access control
Access protection for different parts of the Solar-Log™ can be configured in this menu. The following
sections can be restricted with a pin code or password.
•
Access protection for the display
•
Access protection for the browser menu
•
Displaying advanced configuration
Access protection for the display (only Solar-Log 1000, 1200 and 2000)
A pin code can be activated to restrict access to the Solar-Log™'s display. The pin code may contain a
maximum of 8 numerical digits.
Access at the display can be restricted for the entire display or just the settings section.
Procedure:
•
Enter the pin code.
•
Enter the pin code again.
•
Select restricted Sectionsby checking them.
•
SAVE the settings.

Solar-Log 1000 Specifications

General

Max Inverters	100
Display	LCD
Power Supply	24 VDC
Data Storage	SD Card
Enclosure Protection	IP20
Maximum Number of Strings	100
Ethernet Ports	1
USB Ports	1
Communication Interfaces	Ethernet, RS485
Supported Communication Protocols	Modbus, SunSpec
Power Consumption	5 W