Solar-Log 1000 User Manual

6
General Information
1 General Information
This user manual is intended to assist you in the operation of the Solar-Log™. The yield data from the So-
lar-Log™ can be displayed in several ways:
•
via a web browser in a local network (LAN) (Chapter 2)
•
via the display (touch screen: only Solar-Log 1000, 1200 and 2000) directly on the device (Chapter
4) or
•
via the Internet (Chapter 6)
Our product documentation is being constantly updated and expanded.
The current versions of the documents can be downloaded from our website:
www.solar-log.com.
The descriptions in this manual refer to firmware version 3.5.3
Security informa-
tion!
Update the Solar-Log™ immediately to firmware 3.5.3 build 86 to protect it from
security risks and define a user password.
1.1 The necessary steps for precision monitoring of your PV plant with the
Solar-Log™
•
Connecting and detecting inverters, refer to the "Inverter Connection Manual" and the "Configur-
ing Connected Devices" chapter in the Installation Manual.
•
Refer to the chapter "Configuring Connected Devices" in the Installation Manual for the configura-
tion of inverters, generator power, MPP trackers and module fields.
•
For configuring the notification function and status messages from the inverter, refer to the "Con-
figuring Notifications" chapter in the Installation Manual.
•
For activating and configuring performance monitoring, refer to the "Configuring Connected De-
vices" chapter in the Installation Manual.
Note!
The Solar-Log needs a continuous supply of electricity to avoid data loss and to
ensure precision monitoring of the PV plant

Solar-Log 1000 Specifications

General

Max Inverters	100
Display	LCD
Power Supply	24 VDC
Data Storage	SD Card
Enclosure Protection	IP20
Maximum Number of Strings	100
Ethernet Ports	1
USB Ports	1
Communication Interfaces	Ethernet, RS485
Supported Communication Protocols	Modbus, SunSpec
Power Consumption	5 W