7
Operating via a web browser within your own network
2 Operating via a web browser within your
own network
2.1 Requirements
Information
For faster access, enter "solar-log" in the address bar of the web browser and
create a bookmark.
In a local network (LAN)
To operate the Solar-Log™ via a web browser, you will need to be on a computer that is connected to the
same local network (LAN). This computer will also need to have a modern web browser installed on it.
The Solar-Log™ unit also has to be connected to this network with the proper network settings.
Via the Internet
In addition to a computer with a web browser, you need an active Internet connection as well as a user
account on a server.
To set up a user account, please contact your installer or see our website for more information:
http://www.solar-log.com/en/products-solutions/solar-log-web.html
Note!
Requests and control commands are sent to the inverters, battery systems and in-
telligent appliances via the network interface. For this reason, the network should
always be available (24/7). If the Solar-Log™ is connected via WiFi, we recom-
mend deactivating the overnight shutdown function.
To Next Page
Loading...
Need help?
General
