Solar-Log 1000 User Manual

18
Operating via a web browser within your own network
2.4.3 Table
The output recorded from the connected devices is displayed as a table in Table tab.
Fig.: Table with the recorded output from an example plant
Depending on the particular device connected, the following values are displayed:
•
The current output from each individual inverter.
•
The total current consumption as measured by the consumption meters.
•
The current irradiation per m
2
as measured by the sensor.
•
The values from the battery with the columns Charge/Discharge, Charge Level (%) and Status.

Solar-Log 1000 Specifications

General

Max Inverters	100
Display	LCD
Power Supply	24 VDC
Data Storage	SD Card
Enclosure Protection	IP20
Maximum Number of Strings	100
Ethernet Ports	1
USB Ports	1
Communication Interfaces	Ethernet, RS485
Supported Communication Protocols	Modbus, SunSpec
Power Consumption	5 W