73
Operating via a web browser within your own network
Similar to the History view, there are various values displayed in the graphic view. These values depend on
the particular connected device and/or configured control logic.
All of the values displayed in the key can be selected and deselected at anytime with a left-click to dis-
play individual values (curve) or to display or hide all values (curves). With a right-click, all of the values
(curves) other than the one selected can be hidden.
In the simulation, different view options can be selected for the production and consumption curves.
The following options can be selected:
•
Production curve
• Zero line
• Increasing
• Decreasing
• Constant (a fixed value in watts can be defined here)
• Normal levels of irradiation
• Very high levels of irradiation
• Low levels of irradiation
• Inconsistent levels of irradiation
• Selected day (a particular day can be selected here)
•
Consumption curve
• Zero line
• Increasing
• Decreasing
• Constant (a fixed value in watts can be defined here)
• Normal
• Smooth
• Jagged
• Selected day (a particular day can be selected here)
There is the option to directly switch to the configuration of the Smart Energy switching group by
clicking on the arrow symbol
in the top right corner.
To Next Page
Loading...
