EasyManua.ls Logo

Solid State Logic C100 HDS - Fibre Cabling Examples (See Opposite)

Solid State Logic C100 HDS
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
  $)
All I/O units use the  standard for audio data transfer; the maximum data capacity of each fibre run is therefore 
channels.
Alpha-Link Live units use up to 48 channels; MORSE stageboxes use up to 56 channels per MADI link.
$ $" " "#$(#
RIO stageboxes may optionally be upgraded to support SSL’s high capacity interface standard known as 5+-45312=.
Blacklight links provide  audio channel per fibre cable thereby reducing the number of cable runs required. Blacklight
equipped RIOs are provided with two redundant Blacklight ports to allow for expanded channel capacity and provide fibre
redundancy.
To interface a Blacklight equipped RIO the Blackrock processor must also be specified with a Blacklight interface card in place
of one of the standard 4-port MADI interface cards.
"  ( # # #$
The number of fibre connections that will need to be run between the processor and each remote i/o locations will depend
on the type of connection chosen.
All I/O units are equipped with two fibre connectors to allow backup audio cables to be installed
7+5'7'9/43
 389'11'9/43'3:'1 +)9/437+5'7'9/43? '-+

Table of Contents

Other manuals for Solid State Logic C100 HDS

Related product manuals