#"&# & " ##
&")
C100 HDS consoles are available ex-works and may be collected from SSL’s headquarters in Begbroke, Oxfordshire, UK.
Packing and shipment and installation by specialist carriers can be provided at additional cost. Various options are available
but generally consoles will be packed into wooden crates suitable for airfreight.
##
On-site commissioning by an SSL engineer is available for all C100 HDS systems. Commissioning is usually expected to
take three days but can vary depending on the frame size, configuration and options fitted. Systems that include a MORSE
router or have consoles split for shipment may require an additional 1–2 days of commissioning time.
You should contact your local SSL office or agent at least four weeks prior to delivery to arrange a commissioning date.
Contact: support@solid-state-logic.com.
Before the console can be installed all building work should be completed and the environment MUST be clean. The presence
of dust – particularly cement particles – increases the chance of long-term damage being caused to the moving faders and
other controls. Damage caused by an excessively dusty environment may not be covered by the warranty.
To allow the commissioning process to proceed without delays the following systems will need to be available before the
arrival of the commissioning engineer:
• Air Conditioning blown-through and working
• Installation cables already installed
• Monitor loudspeakers installed and working
• Signal sources available
$"
Three days of standard operator training are available for each C100 HDS system. This is normally scheduled to take place
immediately after installation and, if commissioning is included, is usually carried out by the commissioning engineer. A
further day of advanced operator training is available at additional cost.
On-site maintenance training is also available at additional cost. Training duration can be either one day for a basic
overview or two days to progress to a more advanced level.
Any training should be requested at the time of order. For all training we recommend that no more than five persons
attend each session. If the use of an interpreter is necessary the training period may need to be extended (at additional
cost). Note that travel and subsistence costs are not normally included. For further information please contact SSL’s
training department at: support@solid-state-logic.com.
+7;/)+8';'/1'(1+742
389'11'9/43'3:'1 +)9/437+5'7'9/43? '-+
To Next Page
Loading...
Need help?
Power
DSP and Audio Processing
Weight and Dimensions
