ICP-X7000
1-2 (E)
1-2-2. Recommended Power Cord
This unit does not come with a power cord.
To get a power cord, please contact your local Sony Sales
Office/Service Center.
w
. Use the approved Power Cord (3-core mains lead)/Appli-
ance Connector/Plug with earthing-contacts that con-
forms to the safety regulations of each country if appli-
cable.
. Use the Power Cord (3-core mains lead)/Appliance
Connector/Plug conforming to the proper ratings (Volt-
age, Ampere).
If you have questions on the use of the above Power
Cord/Appliance Connector/Plug, please contact your
local Sony Sales Office/Service Center.
w
. Never use an injured power cord.
. Plugging the power cord in the AC inlet, push as far as it
will go.
Specified power cord
For MKS-X2700/MKS-X7700
For ICP-X7000,MKS-X7075, MKS-X7011
(For AC adaptor)
For customers in the U.S.A. and Canada
1 Power cord, 125 V 10 A (2.4 m) : 1-551-812-11
AC inlet
1
For customers in the U.S.A. and Canada
1 Power cord, 125 V 7 A (2.0 m) : 1-846-101-21
AC Adaptor
1
For customers in the all European countries
1 Power cord, 250 V 10 A (2.5 m) : 1-782-929-12
1
AC inlet
For customers in the all European countries
1 Power cord, 250 V 2.5 A (2.0 m) : 1-575-131-82
1
AC Adapter
To Next Page
Loading...
