Sony ICP-X7000

ICP-X7000
1-9 (E)
1-3-2. Installation Space
. When using the main panel or the AUX panel to be fit in the adjustment console, drill holes in the adjustment console
with dimensions shown below.
. For dimensions B1, B2, B3, B4, B5, C1, and C2 in the figure below, refer to “Detailed dimensions of main panel/AUX
panel” in Section 1-3-3 below.
. COMPACT: A panel consisting of a module (row: 20XPT, width: 284 mm) or two modules (row: 20XPT, width:
137 mm)
NARROW: A panel consisting of a module (row: XPT, width: 137 mm) and a module (row: XPT, width: 284 mm)
STANDARD: A panel consisting of a module (row: XPT, width: 137 mm), a module (row: XPT, width: 210.5 mm), and
a module (row: XPT, width: 284 mm)
. With respect to curve-shaped installation method, contact your local Sony Sales Office/Service Center.
C1
E
E
E
E
F
F F
F
Support plates
*1
Support plates
*1
*1: The COMPACT type does not require the support plates.
Support plates
*1
”Hole”
”Hole”
Unit: mm
Support plates
*1
Main panel single-row type
Main panel dual-row type
X1 ?1
X2
X2
4-M5
4-M4
62.3 (rear side)
67.2 (front side)
62.3 (rear side)
67.2 (front side)
11.5 (Recommended value)
11.5 (Recommended value)
100
C2
X1 ?1
100 125
125
1257
7
25
44.5
146.4
B1/2
B1
B2/2
B2
252525
77
E-E
E-E
F-F
F-F
125
20XPT 829
36XPT 1284 783
28XPT 1130 623
20XPT 975 474
36XPT 1504 783
28XPT 1349 623
20XPT 1195 474
TYPE X1 X2
STANDARD
NARROW
COMPACT
20XPT 829
36XPT 1284 783
28XPT 1130 623
20XPT 975 474
36XPT 1504 783
28XPT 1349 623
20XPT 1195 474
TYPE X1 X2
STANDARD
NARROW
COMPACT