ICP-X7000
1-47 (E)
KY-726 board (MKS-X7017/MKS-X7018/MKS-X7019)
<LED>
D100 (H-2): +12 V
+12 V power supply status indication.
Lit when the +12 V power is supplied correctly.
<Switch>
S500 (G-1): RECONF
Pressing this switch initializes KY-726 board.
S301 (G-2): SETTING2
This switch is used for manufacturing at the factory.
Do not change the setting of this switch.
D100
S301
S500
1
2
3
AB
C
D
EFG
H
KY-726 board (Side A)
To Next Page
Loading...
