Sony MVS-3000 System - Page 285

285
Menus of Disabled Operations and Settings
Appendix
7331.3 Engineering Setup >Switcher >Config
>K-PVW Config
• M/E-2 settings
• [Key5] to [Key8] selection
7331.6 Engineering Setup >Switcher >Config
>DME Config
All menu operations
7332 Engineering Setup >Switcher >Input Primary 33 to 48 settings
7332.1 Engineering Setup >Switcher >Input
>CCR
Primary 33 to 48 settings
7332.3 Engineering Setup >Switcher >Input
>FC Input Select
Primary 33 to 48 selection
7333.1 Engineering Setup >Switcher
>Output >Output Assign
• Output 17 to 32 settings
• M/E-2 Out1 to M/E-2 Out4 selection
7333.2 Engineering Setup >Switcher
>Output >Video Clip
Output 13 to 32 settings
7333.3 Engineering Setup >Switcher
>Output >V Blank/Through
Output 13 to 32 settings
7333.4 Engineering Setup >Switcher
>Output >Safe Title
Output 13 to 32 settings
7333.5 Engineering Setup >Switcher
>Output >4:3 Crop
Output 13 to 32 settings
7333.10 Engineering Setup >Switcher
>Output >Multi Viewer >Source/
Output Assign
• When setting the [Src No] parameter: M/E-2 signal, Primary 33 to 48
signal selection
• When setting the [Output No] parameter: Output 13 to 32 selection
7333.11 Engineering Setup >Switcher
>Output >FC Output Select
Output 13 to 32 selection
7334 Engineering Setup >Switcher
>Transition
M/E-2 settings
7334.1 Engineering Setup >Switcher
>Transition >Preset Color Mix
• M/E-2 settings
• [Key5] to [Key8] selection
7334.2 Engineering Setup >Switcher
>Transition >Transition Curve
M/E-2 settings
7335 Engineering Setup >Switcher >Key/
Wipe/FM/CCR
M/E-2 settings
7335.1 Engineering Setup >Switcher >Key/
Wipe/FM/CCR >Show Key
[M/E2 PVW] settings
7336.2 Engineering Setup >Switcher >Link
>Internal Bus Link >Link Bus Select
• Selection of items related to M/E-2
• Selection of items related to P/P Key5 to 8
7336.5 Engineering Setup >Switcher >Link
>GPI Link >GPI Link Adjust
• M/E-2 Auto Trans, M/E-2 Cut selection on video/button display
• M/E-2 bus settings on bus display
7336.6 Engineering Setup >Switcher >Link
>M/E Link
M/E-2 selection
7336.7 Engineering Setup >Switcher >Link
>Key Transition Link
• Selection of items related to M/E-2
• Selection of items related to P/P Key5 to 8
7337.2 Engineering Setup >Switcher
>Device Interface >GPI Input
• [M/E-2] selection
• Selection of following items on [P/P] (x=5 to 8):
DSKx Cut, DSKx Auto Trans, DSKx SS ? Recall
7337.4 Engineering Setup >Switcher
>Device Interface >GPI Output
• [M/E-2] selection
• Selection of following items when Trigger Type is not set to Status in
[P/P] (x=5 to 8): DSKx Cut, DSKx Auto Trans, DSKx SS ? Recall
• Selection of following items when Trigger Type is set to Status in [P/P]
(x=5 to 8): DSKx On
7337.7 Engineering Setup >Switcher
>Device Interface >DME SDI I/F
All menu operations
Menu Disabled operation/setting
Number Path