Specifications
VX4792 User Manual
E-3
Table E-1: Electrical Characteristics (Cont.)
Characteristics Supplemental InformationPerformance Requirement
Main Output Measured with 50 W Load
Amplitude
Program Range 50 mV
pĆp
to 5 V
pĆp
Program Steps 1 mV
Resolution 1/4096 12 bits
DC Accuracy 50 mV
pĆp
to 5 V
pĆp
50 mV to 500 mV "(0.5% of Amplitude + 5 mV) No offset at 1 MHz clock
501 mV to 5 V "(1% of Amplitude + 25 mV) No offset at 1 MHz clock
Offset
Program Range -2.5 V to +2.5 V
Program Steps 5 mV
Accuracy "(1% of Offset + 5 mV) Waveform is 0 VDC and amplitude is 50 mV
Pulse Response
+15° C to +30° C
Flatness v3% After 20 ns From Edges
Aberration v(7% + 10 mV)
+10° C to +40° C
Rise/Fall Time t4.2 ns
Flatness v5% After 20 ns From Edges
Aberration v(9% + 10 mV)
Impedance 50 W typical
Harmonic Distortion Measured at 250 MHz clock, 0.5 V ampliĆ
tude, 5000 points for sine data, no offset,
and no filter
2nd Harmonics v-40 dBc
3rd Harmonics v-50 dBc
Skew Between Modules v4 ns Filter selection is THROUGH
To Next Page
