Sony XVS-G1

23
a Transition execution section
b Display
The display shows the following information.
• Left-side display:
Target switcher bank name (M/E1 to M/E5, P/P)
Main and sub assignment status wh
en in multi program
2 mode (MAIN, SUB, MAIN&SUB)
• Center display:
State (displayed high
lighted when on) and priority of
key 1 to key 4
Main and sub assignment status wh
en in multi program
2 mode (M, S)
• Right-side display:
State (displayed high
lighted when on) and priority of
key 5 to key 8
Main and sub assignment status wh
en in multi program
2 mode (M, S)
c Transition settings
section (assignable buttons)
You can assign functions, such as selections
and settings,
for transitions in the Home > Setup > Panel > Module >
Button Assign menu (19104.21).
For details about assign
ing buttons, see “Assigning
Control Panel Buttons” (page 397).
Next transition selection buttons
Transition type selection buttons
Wipe direction selection buttons
Name Description
Fader lever Move this up or down to execute a
tr
ansition.
You can press the [KF] button,
turning it on, to use the fader lever
as a keyframe fader.
Transition indicator Displays the transition progress
usin
g LEDs.
Display Displays the transition rate.
[AUTO TRANS]
bu
tton
Executes an auto transition with the
set transition rate and transition
type.
During the transition, the button is
lit amber.
[CUT] button Executes an immediate transition.
Transition indicator
Fader lever
Display
AUTO TRANS button
CUT button
Function
name
Button
name
Description
Background BKGD Switches the background for a
next transition.
Key 1 to
Key 8
KEY1 to
KEY8
Inserts or removes the selected
key for a next tran
sition.
The key is inserted if a key is
currently not inserted, or
removes the k
ey if a key is
currently inserted.
Key Priority KEY
PRIOR
Changes the key priority for a
next transition.
When the [PRIOR SET] button
is lit, the setting for key priority
after the transition is used.
All ALL Selects multiple next transitions
simultane
ously.
Priority Set PRIOR
SET
Sets the key priority.
Function
name
Button
name
Description
Mix MIX Selects mix.
NAM NAM Selects NAM (non-additive
mix).
Super Mix SUPER
MIX
Selects super mix.
Preset Color
Mix
PST
CO
LOR
MIX
Selects preset color mix.
Wipe WIPE Selects wipe.
DME Wipe DME
WI
PE
Selects DME wipe.
FM 1&2 Clip
to FM 15&1
6
Clip
FM1&2
CLI
P to
FM15&16
CLIP
Selects clip transition.
Function
name
Button
name
Description
Normal NORM The wipe proceeds in the
dire
ction from black to white of
the pattern images, shown in
“Wipe Pattern List” (page 456),
or in the direction of the arrows
(normal).
Normal/
Rever
se
NORM/
REV
The wipe direction alternates
between normal and reverse
after each transition.