Sony XVS-G1

24
Transition preview buttons
Keyframe fader button
Pattern limit setting buttons
Main/sub switching buttons (multi program 2
mode)
d In
dependent key transition execution section
Independent key transition execution buttons
(assignable button
s)
You can assign execution buttons for independent key
t
ransitions in the Home > Setup > Panel > Module >
Button Assign menu (19104.21).
For details about assign
ing buttons, see “Assigning
Control Panel Buttons” (page 397).
The [KEYx ON] button (x = 1 to 8) and the [AUTO
TRANS]
button for the same key are assigned as a set.
Display
Displays the following informa
tion for each key assigned
to an independent key transition execution button.
• Key content name (key source name when a key source
i
s selected on a cross-point control block key bus)
• Currently used DME channel or resizer
• Transition rate
• Transition type
Reverse REV The wipe proceeds in the
opposite direction of normal
(reverse).
Function
name
Button
name
Description
Transition
Preview
TRANS
PV
W
Switches the transition preview
mode.
You can check a transition
usin
g preview output.
Function
name
Button
name
Description
KF KF Uses the fader lever as a
keyframe fader.
Function
name
Button
name
Description
Limit Set LIMIT SET Sets the pattern limit.
Pattern Limit PTN LIMIT Enables the pattern limit.
Function
name
Button
name
Description
Main MAIN Switches operation to the
function on the main side in
multi program 2 mode.
Simultaneously pressing the
[
SUB] button activates both the
main and sub operations.
Sub SUB Switches operation to the
function
on the sub side in multi
program 2 mode.
Function
name
Button
name
Description
Function
name
Button
name
Description
Key 1
Transition
to Key 8
Tra
nsition
KEY1 ON
to KEY8
ON
Inserts or removes a key
instantan
eously.
If a key is currently
inserted, the
button is lit amber.
AUTO
TRANS
Inserts or removes a key
automatical
ly with the set
transition rate and transition type.
During the transition, the button
is lit
amber.
Note
Display
Independent key transition execution buttons