Sony XVS-G1

234
List of Utility Commands
The following utility commands can be assigned.
Command Function
M/E-x PGM1 ST
a)
M/E-x PGM2 ST
a)
M/E-x PGM3 ST
a)
M/E-x PGM4 ST
a)
Enable/disable M/E-x program output safe title
x = 1 to 5
M/E-x PVW ST
a)
Enable/disable M/E-x preview output safe title
x = 1 to 5
M/E-x CLEAN ST
a)
Enable/disable M/E-x clean output safe title
x = 1 to 5
M/E-x K-PVW1 ST
a)
M/E-x K-PVW2 ST
a)
Enable/disable M/E-x key preview output safe title
x = 1 to 5
P/P PGM1 ST
a)
P/P PGM2 ST
a)
P/P PGM3 ST
a)
P/P PGM4 ST
a)
Enable/disable P/P program output safe title
P/P PVW ST
a)
Enable/disable P/P preview output safe title
P/P CLEAN ST
a)
Enable/disable P/P clean output safe title
P/P K-PVW1 ST
a)
P/P K-PVW2 ST
a)
Enable/disable P/P key preview output safe title
Color Bkgd2 ST
a)
Enable/disable color background 2 output safe title
DME Monitor Video ST
a)
Enable/disable DME monitor video output safe title
DME Monitor Key ST
a)
Enable/disable DME monitor key output safe title
Frame Memory1 to 16 ST
a)
Enable/disable frame memory output (1 to 16) safe title
Clip Player1 to 4 ST
a)
Enable/disable clip player output (1 to 4) safe title
Multi Viewer1 ST
a)
Multi Viewer2 ST
a)
Enable/disable multi viewer output (1, 2) safe title
Edit Preview ST
a)
Enable/disable edit preview output safe title
Preset ST
a)
Enable/disable preset output safe title
Aux 1 to 48 ST
a)
Enable/disable AUX output (1 to 48) safe title
GPI 1 to 50 Test Fire Output test trigger fro
m GPI output port
Macro Attachment Enbl Enable/disable macro attachment
Macro AT with Rate Register the transition rate when registering an auto transition macro event
Macro AT with A/B Bus Register the background A bus/B bus cross-points
when registering an auto transition macro
event
Macro TL with Region Register the target region when registering an effect timeline macro event
Pre Macro Set macro attachment in pre-macro mode
Post Macro Set macro attachment i
n post-macro mode
Macro Take Resume macro execution
(Enabled in step execution mode or during a pause event with a pause time of “0”)
Macro All Take Resume all paused macros in multi mode
(Enabled in multi mode during a pause event with a pause time of “0”)
Macro Auto Ins Enable/disable macro auto insert mode
Macro Cancel Stop macro execution
Macro All Cancel Stop all simultaneous executing
macros in multi mode
DME Override Enable/disable DME override
DME Graphic Enable/disable DME graphics display
(Applied to graphics for channel selected in device control block)
FTB Enable/disable fade-to-black