303
Editing a Shotbox Register
You can copy, move, and swap register data. You can also
rename, lock, and delete a register.
Copying a register
• An empty register cannot be copied.
• A locked register c
annot be copied.
1
Open the Home > Register > Shotbox > Edit Register
> Copy/Move/Swap menu (18306.22).
A list of copy source registers is
shown on the left,
and a list of copy destination registers is shown on the
right.
2
In the list on the left, select a copy source register.
To select and copy multiple
registers, place a check
mark beside the target registers to copy.
To select and copy all registers, place a check mark in
th
e Select All checkbox.
You can also press the [Select Register(s)] button and
e
nter a register number in the numeric keypad
window.
3
In the list on the right, select a copy destination
register.
When multiple registers are selected, select the first
c
opy destination register.
You can also press the [Sele
ct Destination] button
and enter a register number in the numeric keypad
window.
The copy destination of the first register selected on
t
he left is the first register selected on the right, and
the subsequent registers on the right in the same
relative positions as the selected registers on the left
become copy destinations. The first register on the
right is shown in light blue, and the subsequent copy
destination registers are shown in blue gray.
4
Press the [Copy] button.
5
Check the message, then press [OK].
To copy without renaming a destination register
Set the [w/o Name] button to the on state.
Moving a register
• An empty register cannot be moved.
• A locked register cannot be moved.
Select a move source register and move destination
registe
r in the same way as for copying a register and
press the [Move] button.
For details, see “Copying a register” (page 303).
To move without renaming a
destination register
Set the [w/o Name] button to the on
state.
Swapping registers
Select the registers to swap in the same way as for
copying a register and press the [Swap] button.
For details, see “Copying a register” (page 303).
To swap without renaming the registers
Set the [w/o Name] button to the on
state.
Locking a register
1
Open the Home > Register > Shotbox > Edit Register
> Browse menu (18306.21).
2
Select the target register to lock.
To select and lock multiple registers, place a check
m
ark beside the target registers to lock.
To select and lock all registers, place a check mark in
the
Select All checkbox.
You can also press the [Select Register(s)] button and
ent
er a register number in the numeric keypad
window.
3
Press the [Lock] button.
To release the lock
Select the target register to u
nlock and press the [Unlock]
button.
Deleting a register
A locked register cannot be deleted.
1
Open the Home > Register > Shotbox > Edit Register
> Browse menu (18306.21).
2
Select the target register to delete.
To select and delete multiple registers, place a check
m
ark beside the target registers to delete.
To select and delete all registers, place a check mark
in
the Select All checkbox.
You can also press the [Select Register(s)] button and
ent
er a register number in the numeric keypad
window.
Notes
Notes
Note
To Next Page
Loading...
