341
This section describes the menu for effect timeline
register data as an example.
Loading a File
You can select files from a package to load into registers.
• Files in categories where loading
is locked cannot be
loaded.
• Files cannot be loaded into
a locked register.
1
Open the Home > File > Register > Effect Timeline >
Load menu (10104.11).
The name of the most recentl
y loaded package and
the free space in storage are displayed at the top right.
2
Select a region.
The regions that can be selected vary depending on
t
he category.
For details, see “To select a region” (page 342).
Selection of a region is not required in the shotbox,
ma
cro, and macro attachment categories.
3
Press the [Select] button in the [Package] group.
The [Select Package] wind
ow appears.
4
Select a package and press [OK].
To select the default package
Press the [Default Package] butt
on.
5
In the [Package] group list, select the target file to
load.
To select and load multiple fi
les, place a check mark
beside the target files to load.
To select and load all files, place a check mark in the
Sel
ect All checkbox.
You can also press the [Sel
ect File(s)] button and
enter a file number in the numeric keypad window.
Selection of a file is not
required in the macro
attachment category as there is only one file.
6
In the [Switcher] group list, select a load destination
register.
When multiple files are select
ed, select the first load
destination register.
You can also press the [Select
Destination] button
and enter a register number in the numeric keypad
window.
The load destination of the first fil
e selected in the
[Package] group is the first register selected in the
[Switcher] group, and the subsequent registers in the
[Switcher] group in the same relative positions as the
selected files in the [Package] group become load
destinations. The first register in the [Switcher] group
is shown in light blue, and the subsequent load
destination registers are shown in blue gray.
Selection of a register is not required in the macro
att
achment category.
7
Press the [Load] button.
8
Check the message, then press [OK].
The files are loaded into the
registers.
To display the register view/edit menu
A list of registers is displayed in the [Switcher] group.
Press the [Browse Multi Regi
on] button to recall the
register view/edit menu for each category.
For the effect timeline category, the Home > Register >
Effect
Timeline > Edit Register > Browse Multi Rgn
menu (18301.31) is recalled.
For the key snapshot, wipe snapshot, DME wipe
snapshot
, shotbox, and macro categories, press the
[Browse] button. For the macro attachment category,
press the [Attachment] button.
To display the file view/edit menu
The list of files included in the selected package is
displayed in the [Package] group.
Press the [Browse Files] button to
recall the file view/edit
menu for each category.
For the effect timeline category, the Home > File >
Re
gister > Effect Timeline > Browse Files menu
(10104.14) is recalled.
Macro attachment Macro Attachment >
Load
10104.81
Macro Attachment >
Sa
ve
10104.82
Macro Attachment >
Copy
10104.83
Macro Attachment >
Browse Files
10104.84
Notes
Note
Categories Level 4 > level 5 Menu
number
Note
Note
Note
To Next Page
Loading...
