Sony XVS-G1

36
Menu parameter operation mode
Used to set menu parameters.
For details about menu parameter operations, see
“Setting Parameters” (page 72).
Device/frame memory/clip player operation
mode
This mode controls operations of devices such as VTRs/
di
sk recorders and operations of frame memory/clip
players.
For details about device operations, see “Control of
VTRs and Disk Recorders” (page 218).
For details about frame memory operations, see “Playing
Video” (page 184).
For details about clip player operations, see “Playing
Video” (page 192).
c Trackb
all
This adjusts the parameters of items selected in resizer
operat
ion mode, three-dimensional transform operation
mode, and menu parameter operation mode.
d Z-ring
This adjusts the parameters of items selected in resizer
operat
ion mode, three-dimensional transform operation
mode, and menu parameter operation mode.
It is used for playback operations in device/frame
memory/c
lip player operation mode.
It can control an effect timeline in run control operation
mode.
e Di
splay
Resizer operation mode
The following information is displayed.
• Reference switcher bank name:
M/E1 to M/E5, P/P
• Reference resizer name: KEY1
RSZR to KEY8 RSZR
• Selected parameter name: ASP, LOC SIZE, ROT
PERS, BDR,
CROP
• X-axis, Y-axis, and Z-axis settin
gs (four edge settings
for crop)
Three-dimensional transform operation mode
The following information is displayed.
• Reference DME channel na
me: DME1 to DME4
• Selected three-dimensional space: LOCAL, GLB and
SRC, TRG
T
• Selected parameter name: ASP PERS, LOC SIZE, LOC
XYZ, R
OT, AXIS LOC, SPIN, SKEW
• X-axis, Y-axis, and Z-axis settings
Menu parameter operation mode
“MENU” is displayed.
Run control operation mode
The following information is displayed.
• Reference region name
• Register number, register name
• Effect duration
• Current keyframe number, total number of keyframes,
c
urrent timecode
Device/frame memory/clip player operation
mode
The following information is displayed.
• Recalled file name (for disk recorder)
• Recalled content name (for f
rame memory/clip player)
• Current timecode, start point timecode, stop point
ti
mecode
Center CTR • When the [CTR] button is
pressed once:
Adjusts the three-dimensional
transform parameters to the
detent positions.
• When the [CTR] button is
pressed
twice, or the [CTR]
button is pressed once while
pressing the [SHIFT] button:
Returns the three-dimensional
tra
nsform parameters to the
default values.
Function
name
Button
name
Description
X
Y
Z
X
Y
Z
• Restricts the parameters
ta
rgeted by the operation.
When the [X] button is lit:
Operations on parameter
numbe
r 1 using the trackball
are enabled.
When the [Y] button is lit:
Operations on parameter
numbe
r 2 using the trackball
are enabled.
When the [Z] button is lit:
Operations on parameter
numbe
r 3 using the Z-ring are
enabled.
• When the [X] button, [Y] button,
and
[Z] button are lit green, you
can enter parameter settings
using the numeric keypad
control block.
Fine FINE Switches to fine mode, enabling
fine
adjustment control of setting
values using the trackball and Z-
ring.
Function
name
Button
name
Description