Sony XVS-G1

426
3 Press the [IP Address] button and enter an IP address
using the keyboard.
4 Press the [TCP/IP Port] button and enter a port
number in the numeric keypad window.
5 In the [TC Sense] group, select a timecode sense
mode.
Zero based: Timecod
e sense (detection), taking the
first frame of the loaded file as 00:00:00:00.
SOM based: Sense (d
etection) occurs using the
timecode recorded in the loaded file.
6 In the list on the right, set the video port and response
speed of the item.
Press the [Setting] button for an item to set and enter
a
setting in the numeric keypad window.
Setting a TCP/IP Connected Device
1 Open the Home > Setup > External Device > Serial/
Net Port Setting > General TCP/IP menu (19105.66).
A list of ports is shown on the left and the settings
st
atus of the selected port is shown on the right.
2 In the list on the left, select the target port to set.
3 Press the [IP Address] button and enter an IP address
using the keyboard.
4 Press the [TCP/IP Port] button and enter a port
number in the numeric keypad window.
5 In the list on the right, set the value of the item.
Press the [Setting] button for an ite
m to set and enter
a setting in the numeric keypad window.
Item Item description
Video Port Number of the video port (1 to 4)
a
ssociated with the target port to set
Maximum
Ope
n Delay
Maximum time required to open a file
Maximum
Cueu
p Delay
Maximum time required to cueup a
file
Play After
Cueup Delay
Delay time after cueup until playback
starts
Stop Delay Delay time from issuing the Stop
co
mmand until playback stops
Still Delay Delay time from issuing the Still
co
mmand until playback stops
Command
Dela
y (Auto
Mode)
Delay time from issuing the Auto
Mod
e On/Off command until the
command takes effect
Command
Dela
y (Out
Preset)
Delay time from issuing the Out
Preset command until the command
takes effect
Command
Delay (Preview
In
Preset)
Delay time from issuing the Preview
In Preset command until the
command takes effect
Internal
Parameter (
1)
to (3)
Reserved for future use.
Set the value to “255”.
Item Item description
Internal
Par
ameter (1)
to (10)
Reserved for future use.
Set the value to “255”.