Sony XVS-G1

425
8 In the list on the right, set the video port and response
speed of the item.
Press the [Setting] button for an item to set and enter
a
setting in the numeric keypad window.
Setting loop/recue
You can enable/disable looping and recueing.
1 Open the Home > Setup > External Device > Serial/
Net Port Setting > DDR VDCP menu (19105.63).
2 Enable/disable looping using the [Loop] button.
On: Ena
ble looping. Replay the loaded file in a
continuous loop.
Off: D
isable looping.
3 Enable/disable recueing using the [Recue] button.
On: Enabl
e recueing. After playing the loaded file,
recue the beginning and then stop.
Off: D
isable recueing.
Setting a Disk Recorder (Odetics)
1 Open the Home > Setup > External Device > Serial/
Net Port Setting > DDR Odetics menu (19105.64).
A list of ports is shown on the l
eft and the settings
status of the selected port is shown on the right.
2 In the list on the left, select the target port to set.
3 In the [TC Sense] group, select a timecode sense
mode.
Zero based: T
imecode sense (detection), taking the
first frame of the loaded file as 00:00:00:00.
SOM based: Sense (dete
ction) occurs using the
timecode recorded in the loaded file.
4 In the list on the right, set the response speed of the
item.
Press the [Setting] button for an ite
m to set and enter
a setting in the numeric keypad window.
Setting an AMP Compatible Device
1 Open the Home > Setup > External Device > Serial/
Net Port Setting > AMP menu (19105.65).
A list of ports is shown on the l
eft and the settings
status of the selected port is shown on the right.
2 In the list on the left, select the target port to set.
Item Item description
Video Port Number of the video port associated
wit
h the target port to set
• Output port setting for a player
• Input port setting for a recorder
Maximum
Ope
n Delay
Maximum time required to open a file
Maximum
Cueup Delay
Maximum time required to cueup a
file
Play After
Cueup Delay
Delay time after cueup until playback
starts
Stop Delay Delay time from issuing the Stop
co
mmand until playback stops
Still Delay Delay time from issuing the Still
co
mmand until playback stops
Continue Delay Delay time from issuing the Continue
co
mmand until playback stops
Idle Delay Time from when file unload is
e
xecuted until idle state occurs.
The idle state is a state wherein a
p
revious file has been unloaded
before a new file is loaded (state
where no file has been loaded).
Status Sense
Interval
Time until the next Status Sense
command is issued
Internal
Parameter (
1)
to (10)
Reserved for future use.
Set the value to “255”.
Item Item description
Maximum
Open Delay
Maximum time required to open a file
Maximum
C
ueup Delay
Maximum time required to cueup a
file
Play After
C
ueup Delay
Delay time after cueup until playback
starts
Stop Delay Delay time from issuing the Stop
command until
playback stops
Still Delay Delay time from issuing the Still
command until playback stops
Command
D
elay (Auto
Mode)
Delay time from issuing the Auto
Mode On/Off command until the
command takes effect
Command
Delay (Out
Preset)
Delay time from issuing the Out
Preset comma
nd until the command
takes effect
Command
Delay (Preview
In Preset)
Delay time from issuing the Preview
In
Preset command until the
command takes effect
Internal
Par
ameter (1)
to (4)
Reserved for future use.
Set the value to “255”.