Name: SoundCraft Ui24R
Brand: SoundCraft
Rating: 5 (1 reviews)

To Next Page

To Previous Page

4.3: AUX SENDS

CHANNELS > AUX SENDS

4.3: AUX SENDS

Ui24R User Manual

AuxOutputs(shortforAuxiliary)aretheoutputsonthetoprightoftheUihardware.Theseoutputseach

have their own mix of input sources, separate from the master mix. Generally, aux outputs are used for

musicianstoheartheirownmixonstageviaastagemonitorspeakerortoheadphoneampliersforin-ear

monitoring. Alternatively, the aux outputs can be sent to external hardware FX units.

AUX SENDS is where the aux mixes are created - these can be for monitor outputs, for external FX sends, and

more. They have dedicated outputs on the Ui hardware. The aux faders have orange level indicator lines and

determine how much of each input channel is contributed to the Aux bus. Ui24R has 8 main Aux busses

available.Youcanviewallauxcontributionsfromasinglechannelbynavigatingtothatchannel’sEDITpageand

selecting the AUX SENDS screen / tab.

SelecttheAUXtabyouwishtomix(AUX1toAUX8),andthenadjustthechannelvolumes(contributionsfrom

inputchannels).TheAUXSENDfaderontheright(orangefader)istheAuxMasterchannelfader-the

overall output volume for your AUX mix.

Aux Master channel faders can be viewed together either with the AUX MASTERS button in the Tablet version

Slideout panel, or from the JUMP TO option in the phone software slideout panel. You can also scrolling to the

right-handendoftheMixpagechannels.AuxMasterchannelscanberenamedandstereo-linked(seebelow).

STEREO AUX

Stereo-linking channels is possible for both the input channel sends and the Aux Masters. To stereo link Auxes,

usetheAuxMasterchannelsub-menu(long-click/taponthechannelname).

Gotothechannelpop-upmenu(longclickchannelname)toaccesstheStereoLinkfeature.When2monoinput

channels are stereo-linked on the main MIX page, those channels will also be stereo-linked on the AUX SENDS

page.(2channelspannedleft&rightwithagreenlinklineabovethedBdisplay).

FX ON AUX

It is possible to send FX to your aux mix. Scroll to the end of the channel list and you will see the FX RETURN

faders.When adding the FX you are adding a global FX signal from the main mix.

Questions and Answers:

Need help?

Do you have a question about the SoundCraft Ui24R and is the answer not in the manual?

SoundCraft Ui24R Specifications

General