Operation Instruction
76
Text-In Search
Figure 52 : Text-In Search screen.
The DVR maintains a log of each time there is Text Input. The Text-In Search screen displays this list. Use the arrow
buttons to highlight the event for which you would like to see video.
Pressing the button will extract the video associated with the Text Input and display the first image of the event.
Pressing the
(Play/Pause) button on the Record Table Search screen will start playing the “event” video segment.
Pressing the
PLAY/STOP button returns to live monitoring
.
NOTE:
It is possible that no recorded image displays on the current screen. Press the
MODE button and change
the screen mode to 5x4. You will be able to easily see the camera have recorded video during target time.
Text Input information will be overlaid on the image while the recorded video is played at regular speed.
You can also narrow your event search by selecting the Option… button and setting up the new search condition.
You can search video from the first to last recorded images, or you can set the start and stop times and dates.
Highlight the box beside From and press the button to toggle between On and Off. When set to Off, you can enter
a specific Date and Time. When set to On, the search will be from the first recorded image.
Highlight the box beside To and press the button to toggle between On and Off. When set to Off, you can enter a
specific Date and Time. When set to On, the search will be to the last recorded image.
Highlight the Channel and press the button. Select the text-in devices that you want to search for text input.
To Next Page
Loading...
