Operation Instruction
78
Bookmarks
The Bookmarks screen can also be accessed by selecting Bookmark in the Search – Go To menu.
Highlight the Add Current Position box and press the button
to add the current playback point to the bookmark list. Highlight
the Title box and enter the name of the registered bookmark. Use
the virtual keyboard to enter the bookmark name.
NOTE: Up to eight bookmarks can be registered.
Use the arrow buttons to highlight the bookmark point for which
you would like to see video. The selected bookmark will display
on the screen. The playback controls on the Record Table Search
screen, and Jog and Shuttle on the front panel can now be used to
review the surrounding video.
Figure 53 : Bookmarks screen.
Clip-Copy
Video clips can be copied on an internal DVD RW drive, or external USB hard disk or flash drive. The copied video
clips can be viewed on computers running Microsoft Windows 2000, XP, Vista or 7. Refer to the Appendix – USB
Hard Disk Drive Preparation for information on preparing the external drive for clip copy.
Selecting EZ Copy in the Search – Export menu or pressing the COPY button during playback will set the starting
point of the video to be clip copied, and the
icon displays at the bottom-left corner of the screen. Selecting EZ Copy
in the Search – Export menu or pressing the
COPY button again will set the ending point of the video to be clip copied
by displaying the Clip-Copy screen.
Pressing and holding the COPY button for more than three seconds while in the Search mode initiates the One-Touch
Clip Copy function. The last recorded image will be the ending point of video to be clip copied, and the system will
automatically begin to calculate the possible video data size that the selected storage media can handle.
Select Clip-Copy in the Search – Export menu, and the Clip-Copy screen appears to allow clip copy setup.
Figure 54 : Clip-Copy screen.
The Data Source box displays the source from which you make a video clip copy. The data source can be selected
from Record or Archive in the Search menu.
You can search video from the first to last recorded images, or you can set the start and stop times and dates.
To Next Page
Loading...
