SpectraLink 6500 - LED Indicator Description - Front Faceplate; LED Indicator Description - Front Lan Port

Spectralink IP-DECT Server 6500 Installation and Configuration Guide
14215700 Version 3.0
April, 2014 17
Spectralink IP-DECT Server 6500/Spectralink Media Resource LED Indicators
Front Faceplate
The Spectralink IP-DECT Server 6500/media resource front cover has one indicator describing
the faults and failures of the device. The indicator is off when the Spectralink IP-DECT Server
6500/media resource is not powered. The LED flashes when the Spectralink IP-DECT Server
6500/media resource initializes. The indicator is on when the Spectralink IP-DECT Server
6500/media resource is operating.
Front Lan Port
Spectralink IP-DECT Server 6500/Spectralink Media Resource - Reset Button
It is possible to restart or reset the Spectralink IP-DECT Server 6500/media resource by pressing
the Reset button on the front of the Spectralink IP-DECT Server 6500/media resource.
Table 5 LED Indicator Description - Front Faceplate
LED Indicator Meaning
Steady green OK and idle
Slow green flashing OK and active voice call
Fast green flashing Active, in operation with the maximum active
connections (busy)
Slow red flashing Missing media resource or base station (if it is a
media resource: missing connection to
Spectralink IP-DECT Server 6500)
Fast red flashing Error
Steady red Reset/shutdown in progress
Steady red for 5 seconds
followed by fast red flashing
Reset to factory settings
Table 6 LED Indicator Description - Front Lan port
LED Indicator Meaning
LINK Indicator - yellow Link layer software has established
connection
Activity Indicator - green
flashing
Activity