Spectralink IP-DECT Server 6500 Installation and Configuration Guide
14215700 Version 3.0
April, 2014 38
Assigning DHCP Server Options
You can provide information about the static IP address of the Spectralink IP-DECT Server 6500
in the DHCP server through DHCP options. When defining the IP address of the Spectralink
IP-DECT Server 6500 in the DHCP server, all media resources and base stations are configured
automatically.
Below you will find a description of how to assign options to a DHCP server when opening a DHCP
server console (MS 2000/2003 DHCP Server):
• When adding a new class you must enter the following information:
— Display name: Spectralink IP6500
— Description: Spectralink IP-DECT Server 6500 Solution
— ASCII: Spectralink.IP6000 (case sensitive)
• When adding a new option you must enter the following information:
— Name: Spectralink IP-DECT Server 6500
— Type: String
— Code: 43
• Select options 43.
• Enter the IP address of the Spectralink IP-DECT Server 6500.
Assigning DHCP Server Reservations
If the Spectralink IP-DECT Server 6500 is configured using DHCP, it is necessary to assign a
reservation for the device on the DHCP server. For more information about this feature, contact
your network administrator.
To Next Page
Loading...
