ST STM32F31xx User Manual

STM32F30xx Standard Peripheral Library
UM1581
14/584
DocID023800 Rev 1
1 STM32F30xx Standard Peripheral Library
1.1 Coding rules and conventions
The conventions used in the present user manual and in the library are described in the
sections below.
1.1.1 Acronyms
The table below describes the acronyms used in this document.
Table 2: List of abbreviations
Acronym
Peripheral / unit
ADC
Analog-to-digital converter
CAN
Controller area network
COMP
Analog comparators
CRC
CRC calculation unit
DAC
Digital to analog converter
DBGMCU
Debug MCU
DMA
DMA controller
EXTI
External interrupt/event controller
FLASH
Flash memory
GPIO
General purpose I/O
I
2
C
Inter-integrated circuit
I
2
S
Inter-integrated sound
IWDG
Independent watchdog
NVIC
Nested vectored interrupt controller
OPAMP
Operational amplifier
PWR
Power control
RCC
Reset and clock controller
RTC
Real-time clock
SPI
Serial peripheral interface
SysTick
System tick timer
TIM
Advanced-control, general-purpose or basic timer
USART
Universal synchronous asynchronous receiver transmitter
WWDG
Window watchdog
1.1.2 Naming conventions
The following naming conventions are used in the library:
 PPP refers to any peripheral acronym, for example ADC. See Section 1.1: "Coding
rules and conventions" for more information.

ST STM32F31xx Specifications

General

Brand	ST
Model	STM32F31xx
Category	Microcontrollers
Language	English