ST STM32F31xx - ADC Firmware Driver Defines; Adc

Analog-to-digital converter (ADC)
UM1581
90/584
DocID023800 Rev 1
This parameter can be any combination of the following
values:
 ADC_IT_RDY : ADC Ready (ADRDY) interrupt source
 ADC_IT_EOSMP : ADC End of Sampling interrupt
source
 ADC_IT_EOC : ADC End of Regular Conversion
interrupt source
 ADC_IT_EOS : ADC End of Regular sequence of
Conversions interrupt source
 ADC_IT_OVR : ADC overrun interrupt source
 ADC_IT_JEOC : ADC End of Injected Conversion
interrupt source
 ADC_IT_JEOS : ADC End of Injected sequence of
Conversions interrupt source
 ADC_IT_AWD1 : ADC Analog watchdog 1 interrupt
source
 ADC_IT_AWD2 : ADC Analog watchdog 2 interrupt
source
 ADC_IT_AWD3 : ADC Analog watchdog 3 interrupt
source
 ADC_IT_JQOVF : ADC Injected Context Queue
Overflow interrupt source
Return values
 None.
Notes
 None.
3.3 ADC Firmware driver defines
3.3.1 ADC
ADC
ADC_analog_watchdog_selection
 #define: ADC_AnalogWatchdog_SingleRegEnable ((uint32_t)0x00C00000)
ADC Analog watchdog single regular mode
 #define: ADC_AnalogWatchdog_SingleInjecEnable ((uint32_t)0x01400000)
ADC Analog watchdog single injected mode
 #define: ADC_AnalogWatchdog_SingleRegOrInjecEnable
((uint32_t)0x01C00000)
ADC Analog watchdog single regular or injected mode
 #define: ADC_AnalogWatchdog_AllRegEnable ((uint32_t)0x00800000)
ADC Analog watchdog all regular mode