ST STM32F31xx - RTC Firmware Driver Defines; Rtc

UM1581
Real-time clock (RTC)
DocID023800 Rev 1
389/584
Parameters
 NewState : new state of the timestamp on tamper event.
This parameter can be: ENABLE or DISABLE.
Return values
 None.
Notes
 The timestamp is valid even the TSE bit in tamper control
register is reset.
19.2.32.7 RTC_TamperPullUpCmd
Function Name
void RTC_TamperPullUpCmd ( FunctionalState NewState)
Function Description
Enables or Disables the Precharge of Tamper pin.
Parameters
 NewState : new state of tamper pull up. This parameter can
be: ENABLE or DISABLE.
Return values
 None.
Notes
 None.
19.3 RTC Firmware driver defines
19.3.1 RTC
RTC
RTC_Add_1_Second_Parameter_Definitions
 #define: RTC_ShiftAdd1S_Reset ((uint32_t)0x00000000)
 #define: RTC_ShiftAdd1S_Set ((uint32_t)0x80000000)
RTC_AlarmDateWeekDay_Definitions
 #define: RTC_AlarmDateWeekDaySel_Date ((uint32_t)0x00000000)
 #define: RTC_AlarmDateWeekDaySel_WeekDay ((uint32_t)0x40000000)