ST STM32F31xx

UM1581
Comparators (COMP)
DocID023800 Rev 1
145/584
5.3 COMP Firmware driver defines
5.3.1 COMP
COMP
COMP_BlankingSrce
 #define: COMP_BlankingSrce_None ((uint32_t)0x00000000)
No blanking source
 #define: COMP_BlankingSrce_TIM1OC5 COMP_CSR_COMPxBLANKING_0
TIM1 OC5 selected as blanking source for compartor
 #define: COMP_BlankingSrce_TIM2OC3 COMP_CSR_COMPxBLANKING_1
TIM2 OC5 selected as blanking source for compartor
 #define: COMP_BlankingSrce_TIM3OC3 ((uint32_t)0x000C0000)
TIM2 OC3 selected as blanking source for compartor
 #define: COMP_BlankingSrce_TIM2OC4 ((uint32_t)0x000C0000)
TIM2 OC4 selected as blanking source for compartor
 #define: COMP_BlankingSrce_TIM8OC5 COMP_CSR_COMPxBLANKING_1
TIM8 OC5 selected as blanking source for compartor
 #define: COMP_BlankingSrce_TIM3OC4 COMP_CSR_COMPxBLANKING_0
TIM3 OC4 selected as blanking source for compartor
 #define: COMP_BlankingSrce_TIM15OC1 ((uint32_t)0x000C0000)
TIM15 OC1 selected as blanking source for compartor
 #define: COMP_BlankingSrce_TIM15OC2 COMP_CSR_COMPxBLANKING_2
TIM15 OC2 selected as blanking source for compartor
COMP_Hysteresis
 #define: COMP_Hysteresis_No 0x00000000
No hysteresis
 #define: COMP_Hysteresis_Low COMP_CSR_COMPxHYST_0