ST STM32F31xx

FLASH Memory (FLASH)
UM1581
220/584
DocID023800 Rev 1
 FLASH_OB_Launch()
 FLASH_OB_Erase()
 FLASH_OB_EnableWRP()
 FLASH_OB_RDPConfig()
 FLASH_OB_UserConfig()
 FLASH_OB_BOOTConfig()
 FLASH_OB_VDDAConfig()
 FLASH_OB_SRAMParityConfig()
 FLASH_OB_WriteUser()
 FLASH_ProgramOptionByteData()
 FLASH_OB_GetUser()
 FLASH_OB_GetWRP()
 FLASH_OB_GetRDP()
11.2.5 Interrupts and flags management functions
 FLASH_ITConfig()
 FLASH_GetFlagStatus()
 FLASH_ClearFlag()
 FLASH_GetStatus()
 FLASH_WaitForLastOperation()
11.2.6 FLASH Interface configuration functions
11.2.6.1 FLASH_SetLatency
Function Name
void FLASH_SetLatency ( uint32_t FLASH_Latency)
Function Description
Sets the code latency value.
Parameters
 FLASH_Latency : specifies the FLASH Latency value. This
parameter can be one of the following values:
 FLASH_Latency_0 : FLASH Zero Latency cycle
 FLASH_Latency_1 : FLASH One Latency cycle
 FLASH_Latency_2 : FLASH Two Latency cycles
Return values
 None.
Notes
 None.
11.2.6.2 FLASH_HalfCycleAccessCmd
Function Name
void FLASH_HalfCycleAccessCmd ( FunctionalState
NewState)