ST STM32F31xx User Manual

UM1581
FLASH Memory (FLASH)
DocID023800 Rev 1
227/584
11.2.8.8 FLASH_OB_BOOTConfig
Function Name
FLASH_Status FLASH_OB_BOOTConfig ( uint8_t OB_BOOT1)
Function Description
Sets or resets the BOOT1.
Parameters
 OB_BOOT1 : Set or Reset the BOOT1. This parameter can
be one of the following values:
 OB_BOOT1_RESET : BOOT1 Reset
 OB_BOOT1_SET : BOOT1 Set
Return values
 None.
Notes
 None.
11.2.8.9 FLASH_OB_VDDAConfig
Function Name
FLASH_Status FLASH_OB_VDDAConfig ( uint8_t
OB_VDDA_ANALOG)
Function Description
Sets or resets the analogue monitoring on VDDA Power source.
Parameters
 OB_VDDA_ANALOG : Selects the analog monitoring on
VDDA Power source. This parameter can be one of the
following values:
 OB_VDDA_ANALOG_ON : Analog monitoring on
VDDA Power source ON
 OB_VDDA_ANALOG_OFF : Analog monitoring on
VDDA Power source OFF
Return values
 None.
Notes
 None.
11.2.8.10 FLASH_OB_SRAMParityConfig
Function Name
FLASH_Status FLASH_OB_SRAMParityConfig ( uint8_t
OB_SRAM_Parity)
Function Description
Sets or resets the SRAM partiy.

ST STM32F31xx Specifications

General

Brand	ST
Model	STM32F31xx
Category	Microcontrollers
Language	English