ST STM32F31xx

Real-time clock (RTC)
UM1581
364/584
DocID023800 Rev 1
 RTC_SetAlarm()
 RTC_AlarmStructInit()
 RTC_GetAlarm()
 RTC_AlarmCmd()
 RTC_AlarmSubSecondConfig()
 RTC_GetAlarmSubSecond()
19.2.14 WakeUp Timer configuration functions
This section provide functions allowing to program and read the RTC WakeUp.
 RTC_WakeUpClockConfig()
 RTC_SetWakeUpCounter()
 RTC_GetWakeUpCounter()
 RTC_WakeUpCmd()
19.2.15 Daylight Saving configuration functions
This section provide functions allowing to configure the RTC DayLight Saving.
 RTC_DayLightSavingConfig()
 RTC_GetStoreOperation()
19.2.16 Output pin Configuration function
This section provide functions allowing to configure the RTC Output source.
 RTC_OutputConfig()
19.2.17 Digital Calibration configuration functions
 RTC_CalibOutputCmd()
 RTC_CalibOutputConfig()
 RTC_SmoothCalibConfig()
19.2.18 TimeStamp configuration functions
 RTC_TimeStampCmd()
 RTC_GetTimeStamp()
 RTC_GetTimeStampSubSecond()
19.2.19 Tampers configuration functions
 RTC_TamperTriggerConfig()
 RTC_TamperCmd()
 RTC_TamperFilterConfig()
 RTC_TamperSamplingFreqConfig()